TYPES OF THE CLUBS. 59 | 
Flanging at the haft is found in 2279, 3172 b, 2273, 2277, 2274, 2266. 
All save 2266 have pierced lugs, triangular in 2279 and 2274, pentagonal 
in 2278 and 2277, semicircular in 3172 a, 3172 b, 2273, 2276; the V- 
perforation is found in 3172 b and 2273. All the heads are cupped 
except 2266 (cut square) and 3172 6 (too worn for determination) ; 
2273 carries an unusual band over the curve. 
Length, 37 inches. 
Shaft: Longitudinal ridges throughout; end of haft diamond-shaped, 1.75 
inches by 1.25 inches; lug square, in plane of blade; V-per-  __ 
foration. P 2270. 
Blade: Planes of face 2.25 inches wide; end diamond- Ropes 
° an. 
shaped, 4 by 2 inches; strongly cupped. Plates III. h: IX 
Ornament: Unit 1, 3.75-inch alternate panels transverse 4; XIII, 54, 55; 
band-and-zigzag, much condensed, and three longitudinal XIV, 62, 63, 70, 
band-and-zigzag extended, with in each case a solid triangle 2%) 72), 73) 78; 
. ; ‘ : : : : , 906; XVI, 111; 
in middle of line. Unit 2, 3 inches, same design on opposite Xyjf, 142, 143. 
faces. Unit 3, 3 inches, same design on same faces as unit 1. 
Unit 4, 3.5-inch transverse band-and-zigzag as in unit 1 on panels 1 and3; 
on panel 2, two stripes of longitudinal band-and-zigzag and one of loop-and-tie; 
panel 4, loop-and-tie and one element of basketry. Unit 5, 3-inch panels of 
triangles of basketry with band-and-zigzag in corners. Unit 6, 3.25 inches, 
same. Unit 7, 3 inches, two adjoining panels of one face, same as unit 5;0n 
opposite face one panel basketry, the other herring-bone. Unit 8, 2.5-inch 
panels herring-bone and basketry on same face as unit 7, but alternating 
panels; on opposite face panel of 2 band-and-zigzag transverse condensed and 
3 herring-bone; next panel 3 transverse band-and-zigzag condensed and 
2 band-and-zigzag longitudinal arranged quarterly. Unit 9, on one face 
2 panels as in unit 5; other face one panel herring-bone longitudinal, the 
other herring-bone transverse. Unit 10, one face panel herring-bone trans- 
verse, the other herring-bone longitudinal; other face, panel herring-bone 
transverse, panel diagonally divided into herring-bone longitudinal and band- 
and-zigzag longitudinal. Unit 11, one panel continues ornament last 
panel of unit 10; adjacent panel 1 element herring-bone, 1 element basketry, 
separated by longitudinal loop-and-tie; other face, 1 panel basketry and 
longitudinal herring-bone, one panel of one element transverse band-and-zigzag 
condensed, 4 elements herring-bone. Unit 12, one panel transverse herring- 
bone, panel longitudinal herring-bone with one element basketry; other face, 
panel transverse herring-bone, last panel continued ornament of correspond- 
ing panel in units 9, 10, 11. Unit 13, 2 inches on median line, 2.5 inches at 
edges, panels of basketry, herring-bone, and band-and-zigzag irregularly 
combined. 
Human and animal figures on all four sides; on one face such designs are 
restricted to units 11 and 12, on other face distributed as far up the shaft 
as unit 7. 
Length, 28 inches. 
- Shaft: Circumference of haft, 5 inches, flanging to 6 inches; lug triangular, 
vertical to plane of blade, perforated. 
Blade: Planes of face, 3 inches wide; end diamond-shaped, 5 by F 3099: 
. E a : amoa. 
3.25 inches; ridge along major, diagonal. 
Ornament: Panels of band-and-zigzag, some completed, others merely 
blocked out; grip, 4 inches; 4 dextral spirals partly cut. 
