TYPES OF THE CLUBS. 43 
nal, the other longitudinal and dextral spiral, separated by unit of basketry; 
strap of double band-and-zigzag; panel 2.5 inches longitudinal band-and- 
zigzag; strap 0.75 inch double band-and-zigzag; panel 3.25 inches dextral 
spiral double band-and-zigzag; strap 0.75 inch double band-and-zigzag; longi- 
tudinal band-and-zigzag to head, unfinished at inner side of bend. 
Spike: 4 radial band-and-zigzag on plate; 3 straps of same. 
Length of shaft to bend, 39 inches; from bend to end of spike, 13 inches. 
Circumference of haft, 4.5 inches; at bend, 6.5 inches; at head, 6.5 inches. 
Head: 6 rows of points, workmanship poor; circumference, 
12 inches; spike, 7.5 inches. P 3182. 
Ornament: Grip, 11 inches; band-and-zigzag strap at haft; an 
: : ak ; ; man. 
5-inch unit longitudinal band-and-zigzag with one element pjate rx, 7. 
of compound dentelle plates pointing toward handle, the first 
four plates of 3 teeth, the fourth of 4, fifth and sixth of 3, thence onward of 4; 
5-inch unit of longitudinal band-and-zigzag in lightly sinistral spiral. 
Length of shaft to bend, 37 inches; from bend to end of spike, 10 inches. 
Circumference of haft, 5.25 inches; at bend, 6.5 inches; at head, 7.5 inches. 
Head: 8 rows of points; circumference, 15 inches; spike, 4 
inches; on plate shallow pits one on each side of spike as for P 2252. 
inlay, as is present in P 2486. Ysobel. 
: i leit: é Donaldson. 
Ornament: Grip, 9.25 inches, ending in band-and-zigzag  pjate VIII, d; 
strap; 4 double stripes band-and-zigzag, a fifthin which double Ix, 2, 3. 
band-and-zigzag has addition of 1 stripe double zigzag without 
inner band, and where this tends to produce diamonds the union of points is 
corrected by thin incised line; alternately 5 stripes of longitudinal extended 
zigzag. 
Perforation on knob, V-type. 
Length of shaft to bend, 31 inches; from bend to end of 
spike, 11 inches. P 3182 b. 
Circumference of haft, 6 inches; at bend, 7 inches; at head, Fiji. 
8 inches. Oldman. 
Head: 7 rows of points; circumference, 19 inches; spike, 4 Plate HL, d; VI, d. 
inches. 
Length of shaft to bend, 33 inches; from bend to end of spike, 9 inches. 
Circumference of haft, 5 inches; at bend, 6 inches; at head, 
6 inches. rh 
Head: 7 rows of points; circumference, 15 inches; spike, Clark-Oldman. 
3 inches and splintered at point by uncertain amount; human 
tooth inlaid on plate. 
AXE-BIT TYPE. 
Plates II, e; IV, 1, 2, 3. Provenience: Fiji. 
In the museum are 3 specimens of an excessively rare and most inter- 
esting type, one so infrequently met with in museum keeping as to prove 
that their occurrence in Fiji was rare. In default of the Fijian name, 
which does not appear of record, and in anticipation of conclusions 
which I hope to establish, I have chosen to designate this the axe-bit 
type. In Fiji it was apparently never a littoral type; the only one 
which I ever saw in its home was among the Kai Colo mountaineers 
