42 CLUB TYPES OF NUCLEAR POLYNESIA. 
The haft measurements are deferred for general consideration of the 
hand-grip. The increment between haft and bend in this series is 
stated as follows: 1 inch, 3182 a, 2486, 3183, 3182 b; 1.25 inches, 2487, 
2252; 1.75 inches, 3787; 2 inches, 3182. The increment between bend 
and head is various; in 2487 there is a decrease of 0.5 inch; in 3182 and 
2486 there is no change of dimension; in 3183 the increase is 0.75 inch; 
an increase of 1 inch appears in 2252, 3787, 3182 a, and 3182 b; and in 
the last two pieces the increment from haft to bend and from bend to 
head is the same. 
Length of shaft to bend, 36.5 inches; from bend to end of spike, 7.5 inches. 
Circumference of haft, 5 inches; at bend 6 inches; at knob 6.75 inches. 
Knob: 5 rows of points; circumference 9 inches, spike 2.5 
inches, long, bluntly conical, and at base occupying full space P.3183- 
normally devoted to plate, which is thus reduced to a mere pjate VI, e. 
ring, and at shaft end of knob the points lack the radial edges. 
Ornament: Grip, 8 inches, divided midway by single band; element nearest 
haft longitudinal band-and-zigzag, with one unit double zigzag without band; 
second element band-and-zigzag, in which the zigzag is loosely extended, one 
unit of double zigzag without band. 
‘This club is poorly executed and is the only instance in the collection in 
which the spike is blunt and in which the haft lacks knob at end. 
Length of shaft to bend, 27 inches; from bend to end of 
spike, 10 inches. 
Circumference of haft, 5.25 inches; at bend, 7 inches; at 3787- 
head, 8 inches. i, 
Head: 7 rows of points; circumference, 18 inches; spike, Plate VI, f; XI, 24. 
4.5 inches long. 
Ornament: None. 
Length of shaft to bend, 29 inches; from bend to end of spike, 7 inches. 
Circumference of haft, 4.25 inches; at bend, 5.5 inches; at head, 5 inches. 
Head: 5 rows of points; circumference, 10 inches; spike, 3 
inches long, without molded ring. Pili 
Ornament: Grip, 7.5 inches long, longitudinal band-and- pec oninan 
zigzag much extended, ending in small band-and-zigzag strap; 
from grip to bend of shaft, service of coir sennit. 
Haft pierced transversely, one hole on end forking into two on the shaft 
side. 
P 2487. 
Length of shaft to bend, 34 inches; from bend to end of spike, 8 inches. 
Circumference of haft, 4.5 inches; at bend, 5.5 inches; at head, 6.5 inches. 
Head: 6 rows of points; circumference, 12 inches; spike, 4 inches 
one P 3182 a 
Ornament: Partly executed plan of complete decoration. re prea By 
Grip: 3 band-and-zigzag straps, 1 inch; longitudinal band-and- 
zigzag, 3 inches; 3 band-and-zigzag straps, 1 inch; longitudinal band-and- 
zigzag, 3 inches; 3 band-and-zigzag straps, 1 inch. In the longitudinal ele- 
ments the bands are indicated as double by rude scoring. 
Shaft: In 14.75 inches beginning of dextral spiral of zigzag without band 
making three turns; after spiral double band-and-zigzag strap 0.75 inch; 
panel 2.5 inches of two band-and-zigzag units, one dextral spiral and longitudi- 
