TORO HOMELAWN 
18-INCH cuT $1 13% 
The Homelawn is built from the ground up as 
a power mower and will provide the type of 
service that you expect from a mower specifi- 
cally built for power. It is not to be confused 
with some of the lightweight hand mowers on 
which power has been added. 
Strongly built of pressed steel—that marvelous 
construction which has meant so much to the 
automobile—you get everything in the way of 
strength and lack of brittleness, but in addition 
you get ease of handling and a lighter mower, 
which is so important. 
The Homelawn is a self-propelled mower and 
the steady dependable Briggs & Stratton engine 
pulls the mower and drives the cutting reel. 
Because you don't have to push it, your son, 
daughter or your wife can handle it without 
undue physical strain. 
Ample power and wide-diameter rubber-tired 
wheels take the Homelawn up sharp grades 
and terraces. The 6-inch five blade alloy steel 
revolving reel is securely welded to steel discs, 
making it relatively free from springing when 
hitting small foreign objects like acorns and 
twigs. 
It can be sharpened under its own power by 
means of a simple round Figure 8 belt. 
Freedom from annoying minor mechanical diffi- 
culties is assured by the simple and easily 
understood V belt transmission, with the com- 
plete elimination of complicated clutches and 
mechanisms. 
The Toro Homelawn is built in two sizes—18 
and 21-inch—for lawns up to 1!/, acres. If your 
lawn is one acre, then specify the 21-inch be- 
cause it will save you both time and energy 
POWER MOWERS 
21-INCH cuT $1 25° 

~ 
on hot days. The price of both models is so 
low every home-owner can have one. 
The Homelawn will give you excellent depend- 
able service—and for those who like to cut high 
in July and August, it is built to cut up to 2}/ 
inches to preserve the strength and fertility of 
your lawn. 
Grass catchers are available for those who 
want them. 
Homelawn power mowers are used in practi- 
cally all parts of the world, and will do a 
beautiful job of cutting, and amaze you with 
their sterling performance. 
SPECIFICATIONS 
MOTOR: Briggs & Stratton 4 cycle 23 H.P. @ 2200 
RPM, bore 2”, stroke 11/4”; oil bath air cleaner—l 
quart gas tankK—suction feed carburetor—rope starter, 
magneto ignition. 
CHASSIS: All steel construction. 
REEL: 6” diameter stamped steel spiders—five blade 
reel made of heat-treated alloy steel. 34” solid steel 
reel shaft running on adjustable Timken bearings with 
grease seals and protection cups. 
BED KNIFE: Lipped blade of heat-treated alloy steel, 
easily accessible screw adjustment from above. Bed 
knife and bar can be removed without disturbing side 
plates. 
WHEELS: Alloy grey iron running on oiless bronze 
bearings. Toro rubber tires 1.75”x11.00” easily replaced. 
[ 63 ] 
REAR ROLLER: Large diameter hard maple—multiple 
section for easy turning. 
DRIVE: V belt and chain drive, manually controlled 
from handle bars. 
HANDLE: Tubular steel, adjustable for height. 
HEIGHT OF CUT: 13/16” to 2!4”—easily adjusted. 
WIDTH OF CUT: 18” and 21”. 
WEIGHT: 18-inch—110 pounds. 2l-inch—120 pounds. 
GRASS CATCHER: Canvas and metal grass catcher 
available at extra cost. 
