
PREPARES A COMPLETELY P 
IN ONE OPERATION 
Once over the ground with an Ariens Tiller and the seed bed is 
properly prepared—thoroughly aerated with fertilizer and the 
soil shredded and evenly mixed from top to any depth down to 
12 inches. The soil is literally torn into shreds. There are no 
large chunks of ground left to retard seed growth—no plow sole 
—but a seed bed in which weeds and insect life are destroyed. 
In the one operation you obtain a better seed bed than can be 
obtained by plowing, discing, harrowing and even rolling the 
ground. Fine seed beds will hold more moisture, so necessary 
to plant growth, than seed beds not so well prepared. The wide 
use of Ariens Tillers attest to their efficiency and general accept- 
ance by growers. 






Ariens Tillers meet 
all requirements of 
gardener, market 
grower, landscaper, 
nurseryman, etc. 
[ 6 

DELIVERED 
LOUISVILLE, KY. 
ULVERIZED LEVEL SEED 
all 
$98025 

The tines, made of specially 
treated high-quality spring steel, 
revolving through the ground take 
small “‘bites’’ at each revolution, 
completely pulverizing and mixing 
the soil. 
'T HARROWS 
AS IT DISCS 
AS IT PLOWS 

SPECIFICATIONS 
MOTOR: 9 H.P. Wisconsin 4-cycle cylinder, 35” x 4” 
stroke, air cooled, equipped with oil bath air cleaner, 
high tension magneto with impulse starter, mechanical 
governor. 
CLUTCH: Twin Disc running in oil bath. 
TRANSMISSION: Two speed forward and reverse, all 
bearings Timken tapered roller, heat-treated gears and 
Ampco bronze worm, entirely enclosed bath lubrication, 
oil and dust tight. 
MILLER DRIVE: Hardened worm and Ampco bronze gear, 
Timken and ball bearings equipped with safety throw- 
out clutch. Entirely enclosed and running in oil bath. 
WHEELS: Standard equipment 5” x 12” tractor tires or 
steel wheels. Wheels are free wheeling or can be locked 
if desired. 
HANDLEBARS: Adjustable up or down to suit any op- 
erator and to either side of machine so operator does not 
have to walk in newly tilled soil. All controls within easy 
reach of operator’s position. 
SPEEDS: Low 1! to 1 M.P.H., high 1 to 214 M.P.H., re- 
verse 34 to 1!/, M.P.H. 
FUEL CONSUMPTION: °5/g gallon per hour full load. 
CAPACITY: 20 inch cut, 1) acre per day deep tillage, 
cultivating up to !/, acre per hour. 
DEPTH: Easily regulated from 2 to 10 inches. 
WIDTH OF TILLAGE: Standard Model B cuts 20 inch 
width, may be easily reduced to 14 inches or increased 
to 26 inches for cultivating by using larger hood. 
DIMENSIONS: Length 78 inches, overall width 23 inches, 
height 28 inches, weight 625 pounds. 
7 | 
