LOUDEN "WORLD FAMOUS" BARN EQUIPMENT 
Louden Carriers Fit All Tracks 
Carriers are shipped to operate on track 2 in. wide, are 
quickly adjusted to any steel track. Remove nuts and place 
spacers as shown below to fit 24% in. and 2% in. track. 
Tighten nuts and burr threads before using carrier. 
he ang 
Se 

TRIP BLOCKS—TIf carrier is to operate on other than 
Louden Double-Bead No. 571 Track, specify proper trip 
block shown below. Unless otherwise specified No. 10 
Trip Block furnished. 
ETIP SB LOCKS F CaCl th aie acetic ee eer acetate eae a Prayenene $1. 
=] 
° 

WIDE | 

TRACK 
SANESVILLE 
STRICKLER 
MONTGOMERY-WARD 
__ TRACK I HIGH 2%” WIDE 
TRACK 2° HIGH 2” 
STAR “Y" 
SINGLE OR DOUBLE FLANGE . 
aes 

Trip Blocks 
for 
Louden Carriers 
for 
Any Track 
TRACK 1HIGH 23” WIDE 
STAR 
PEERLESS 
& 
g 
= 
ae 
zs 
Ae 
3. 
§ 
- 
WHITMAN & BARNES 
TRACK 1 HIGH 24 WIDE 

Louden Senior Fork Carrier No. 1100 
Here is a real Haycar—the Louden Senior — recom- 
mended for use with Louden Iron Claw Fork. A reversible 
car that can be turned around without removing from 
track. Rugged, certified malleable iron frame. Large 7 in. 
roller bearing gray iron rope wheels greatly prolong life 
of rope and permit the 
heaviest loads to be 
hoisted with ease. Track 
wheels, 3 in. diameter; 
axles, 15 in. apart on cen- 
ter—the long -wheelbase 
evenly distributes the 
weight on track making 
it easy to return carrier. 
Swivel prevents rope 
from kinking and twist- 
ing. Carries hay fork 
within 20 in. of track. 
% in. or 13/16 in. manila 
draft rope recommended. 
One fork pulley, 1 trip 
block, 2 end stops and 1 
built-in rope swivel fur- 
nished with carrier. 
No. 1100—Senior Fork 
Carrier, each ...$24.00 
No; 430—-—J.Uunior HorkiGarrietinn cis tec erieiersieteiints 6 $19.00 
64 


Louden "Iron Claw" Hay Fork 
“The best hay tool on the mar- { 
ket,” is what they say about the 
Louden “Iron Claw.’ It has 
everything a perfect hay unload- 
ing device should. Triple-acting 
hinges connecting each pair of 
tines positively eliminate tan- 
gling so often encountered in 
other loose tine forks. The triple- 
acting hinges make it possible 
to use only one electrically- 
welded chain for each pair of 
tines thus each pair act as one 
unit and it is impossible to set 
the tines wrong. 

Fork sets easily and takes up 
giant loads. The positive locking 
head holds the load securely but 
a Slight tug on the trip rope im- 
mediately releases the hay — it 
falls loose and is quickly mowed 
—no rolls to break with the “Iron 
Claw.” Handles baled hay just 
as efficiently. The Louden Senior “Iron Claw” can take up 
as many as 10 bales at a trip—it will last a lifetime. 
No. 3039—‘“‘Iron Claw” Fork (Standard) Tines 26 in. 
Spread 6 ft. 4 in.; weight 47 lbs., each.......... $18.65 
No. 3041—“‘Iron Claw” Fork (Giant Size) Tines 32 in. 
Spread 7 tie bin sawelent 53 Ibs) veachs. sae... e 19.40 
Harris Double 
Harpoon Forks 
A reliable fork at real low cost— 
best materials and workmanship 
throughout — three sizes — (width 
measurements between tines). 
No. 353-1514 in. wide, goes into 
hay 26 in. Wt. 201% Ibs., each.$5.10 
No. 674—15%% in. wide, goes into 
hay 32 in. Wt. 24 lbs., each... 5.40 
No. 676—24 in. wide, goes into 
hay 34 in. Wt. 3434 lbs., each. 9.70 

Double Harpoon 
Rocker Bar Fork No. 1137 
The fork that takes up larger 
loads than other double tine type 
forks. Tines reach down to very 
bottom of the rack for load instead 
of a few inches above as in the 
case with~ the Harpoon. Won't 
drop the load because the points 
are locked up securely with a lever 
until tripped. Goes into hay 31 in. 
Used with any carrier. High car- 
bon fork steel—15% in. wide in- 
side; weight 32 lbs. 
No. 1137—Rocker Bar Fork 
each 

No. 1137 

WISEMAN-DOWNS CO., 34 E. Pratt St—PLaza 3895-3896 
