PRUNERS and GRASS SHEARS : 

No. 119 ORIGINAL “SNAP-OUT’ PRUNER—Easy = snap-out 
action of keen V blades onto non-dulling soft metal anvil cuts 
large, tough, 9% inch branches like twigs. Pruner beautifully 
finished in bright chromium plate. All parts easily replace- 
HONE eh pba dol ay tno ata oan eae ene ue RN atid ey Se era RR cen $2.50 
No. 118—Ladies’ ‘‘Snap-Cut'’ Pruner, 6 inch lengfth........ $1.85 

pruner combining easy operation with sturdy construction and 
attractive appearance. Polished and tempered blades attached 
to handle by small bolts. Black enameled, piessed steel, non- 
pinching knurled handles afford sure grip. Cuts closely with- 
out injury to bark. Overall length 8 inches.....0.....00..02...2.. $1.50 

No. 151 DROP FORGED PRUNER—Here is a one-piece, cutlery 
steel drop-forged pruner of particular value to the householder 
with limited pruning requirements. Simple construction, fool- 
proof and strong, it is extremely serviceable. Ground and 
polishedas Overally lengih=.9" inches + a740s se) $1.50 




No. 157 IMPROVED EZY-CUT GRASS SHEARS—A handsome, 
highly efficient tool. Self tensioning. Cuts clean the full length 
of the blades. Tempered cutlery steel blades with cadmium 
tust-resisting finish. Easy, non-tiring, non-pinching ‘‘squeeze- 
grip’’ action. Operating parts housed and protected............ $1.95 
No. 57 EZY-CUT SPECIAL GRASS 
SHEARS—Similar to No. 157, but con- 
structed for competitive sale. Red 
enamel pressed steel handles. Tem- 
pered steel blades assembled _ to 
handles by rivets. A splendid value 
that will give good, efficient service. 
Price $1.35 

No. 25 and 26 EZY-CUT LONG HANDLE PRUNERS—An eco- 
nomical but rugged tool, easily cuts up to 2 inch green wood. 
Simple construction, no complicated sliding compound lever 
action. Tempered, forged steel cutting parts are capable of 
heavy pruning, cutting brush, clearing land, etc. Expertly 
ground blades cuts clean and close and stands up under rough 
usage. Handles are best grade ash. 
No. 25—22 inch handles, 28 inches overall length 
No. 26—30 inch handles, 36 inches overall length 

[57] 

No. 149 “SNAP-CUT” LONG HANDLE PRUNER—The highly 
efficient ‘‘Snap-Cut’’ blade-and-anvil cutting principle, applied 
to a lopping shear. Alloy steel blade, carefully hardened and 
tempered. The soft metal anvil ensures long cutting life with- 
out dulling blade. Narrow cutting head permits easier opera- 
tion in close or tangled growth. Cuts 114 inch limbs easily. 
~20 inch ash handles, length overall 25 inches...........0....... $4.00 

Se 
No. 154N-8 “LIGHTNING CLIPPER’ HEDGE SHEARS—Finest 
cutlery steel, flame hardened edge blades, long bevels and 
keen edges. Top blade has sharp, hooked teeth to grip twigs 
for easy cutting. Both blades hardened, tempered, precision 
hollow ground and beautifully polished. 8 inch blades....$3.75 

e Ss qb; TIE: FF gg mS, 
= s e i Se ee ON 
—s 

























No. 1312 “TIP TOP’’ TREE PRUNER—A patented pruner in 
two 6 foot jointed sections which are easily and quickly as- 
sembled to make a 12 
foot Tree Pruner. 
Tempered steel 
blades, fittings and 
operating wire. Can 
be.used in 6 ft. or 
fee? wert wength. 
Additional extension 
sections may be add- 
ed for even greater 
length. Two sections 
2ettes length. $5.00 

No. 13S—Extra Ex- 
tension 6 foot...... 1.25 
No. 1575 “STAND 
UP’ GRASS SHEARS Sen 

—The last word ina 
grass clipping tool. 
Cuts from a standing 
position, simple as 
walking, no _ stoop- 
ing, bending, sore 
knees, or backaches. 
New 4 inch diameter 
wheel makes shears 
easy to position, easy 
to roll exactly where 
desired. Wheel can 
be quickly removed, 
enabling high, light 
trimming of vines and 
rock gardens. New, 
exclusive, height .ad- 
juster adapts Stand 
Up Grass Shears to 
most comfortable po- 
sition for short or 
tall users. Also reg- 
ulates exact  trim- 
ming level. $3.75. 
HEIGHT 

