YOU CAN DEPEND ON Gautous Seeds 
ARIENS7iller 
Delivered Price 
Louisville, Ky. 
MODEL “‘C”’ 14 in. cut—6 H.P. 4 cycle engine........ $593.00 
MODEL “‘C’’ 20 in. cut—6 H.P. 4 cycle engine........ 618.00 IT HARROWS 
MODEL *‘B"’ 20 in. cut—9 H.P. 4 cycle engine........ 675.55 AS IT DISCS 
MODEL “‘B”’ 24 in. cut—9 H.P. 4 cycle engine........ 700.55 : 
MODEL “D" 24 in. cut—121 H.P. 2° cylinder, ~ AS IT PLOWS 
AA CYCIELONGING wterrete eis corey nial er oAe Raa ee Meceeies 815.00 
Ariens Tillers meet all SPECIFICATIONS 
requirements of garden- ){OTOR: 9 H.P. Wisconsin 4-cycle cylinder, 356” x 4” 
stroke, air cooled, equipped with oil bath air cleaner, 
high tension magneto with impulse starter, mechanical 
nurseryman, etc. governor. 
CLUTCH: Twin Disc running in oil bath. . 
TRANSMISSION: Two speed forward and reverse, all 
bearings Timken tapered roller, heat-treated gears and 
Ampco bronze worm, entirely enclosed bath lubrication, 
oil and dust tight. 
MILLER DRIVE: Hardened worm and Ampco bronze 
gear, Timken and ball bearings equipped with safety 
throwout clutch. Entirely enclosed and running in oil 
bath. 
WHEELS: Standard equipment 5” x 12” tractor tires or 
steel wheels. Wheels are free wheeling or can be locked 
if desired. 
HANDLEBARS: Adjustable up or down to suit any op- 
erator and to either side of machine so operator does not 
have to walk in newly tilled soil. All controls within 
easy reach of operator’s position. 
SPEEDS: Low % to 1 M.P.H., high 1 to 2% M.P.H., re- 
verse 3% to 1% M.P.H. 
FUEL CONSUMPTION: % gallon per hour full load. 
CAPACITY: 20 inch cut, 1% acre per day deep tillage, 
cultivating up to % acre per hour. 
DEPTH: Easily regulated from 2 to 10 inches. 
WIDTH OF TILLAGE: Standard Model B cuts 20 inch 
width, may be easily reduced to 14 inches or increased 
to 26 inches for cultivating by using larger hood. 
Page 71 
er, market grower, land- 
scaper, 
