YOU CAN DEPEND ON Gaatous Seeds 
PRUNERS and GRASS SHEARS 
No. 119 ORIGINAL “SNAP-OUT”’ PRUNER—Easy snap-out 
action of keen V blades onto non-dulling soft metal anvil 
cuts large, tough, % inch branches like twigs. Pruner 
beautifully finished in bright chromium plate. All parts easily 
repiiceaples oe, aneh) lengths, /., sigt.c austere cholo slim hens scl oo artiane oles $2.75 
No. 118—Ladies’ ‘‘Snap-Cut’’ Pruner, 6 inch length..... $2.10 
No. 122 CLIPPER PRUNER—A lightweight, but strong all 
steel pruner combining easy operation with sturdy construction 
and attractive appearance. Polished and tempered blades 
attached to handle by small bolts. Black enameled, pressed 
steel, non-pinching knurled handles afford sure grip. Cuts 
closely without injury to bark. Overall length 8 inches. .$1.65 
No. 151 DROP FORGED PRUNER—Here is a one-piece, 
cutlery steel drop-forged pruner of particular value to the 
householder with limited pruning requirements. Simple con- 
struction, fool-proof and strong, it is extremely serviceable. 
Ground and polished. Overall length 9 inches ............ $1.65 
No. 257 IMPROVED EZY-CUT GRASS SHEARS—A hand- 
some, highly efficient tool. Self tensioning. Cuts clean the 
full length of the blades. Tempered cutlery steel blades with 
cadmium rust-resisting finish. Easy, non-tiring, non-pinching 
mraseere en Di, action. Operating parts housed and Ng oe 
PICO EE a ciee ais nelsreles bese ce bie © cotettetalele as Waistelereieieieinre aravessie Sno cack 25 
No. A57 EZY-CUT SPECIAL GRASS 
SHEARS—Similar to No. 157, but con- 
structed for competitive sale. Red 
enamel pressed steel handles. Tem- 
pered steel blades assembled to han- 
dles by rivets. A splendid value that 
will give good, efficient service. .$1.95 
No. 057 EZY-CUT SPECIAL $1.20 
No. 25 and 26 EZY-CUT LONG HANDLE PRUNERS—An 
economical but rugged tool, easily cuts up to 2 inch green 
wood. Simple construction, no complicated sliding compound 
lever action. Tempered, forged steel cutting parts are capable 
of heavy pruning, cutting brush, clearing land, etc. Expertly 
ground blades cuts clean and close and stands up under rough 
usage. Handles are best grade ash. 
No. 25—22 inch handles, 28 inches overall length...... $5.25 
No. 26—30 inch handles, 36 inches overall length...... $5.75 
No. 149 “SNAP-CUT” LONG HANDLE PRUNER—The highly 
efficient ‘“‘Snap-Cut’’ blade-and-anvil cutting principle, applied 
to a lopping shear. Alloy steel blade, carefully hardened and 
tempered. The soft metal anvil ensures long cutting life 
without dulling blade. Narrow cutting head permits easier 
operation in close or tangled growth. Cuts 1% inch limbs 
easily. 20 inch ash handles, length overall 25 inches..... $4.75 
No. A54-9 “LIGHTNING CLIPPER” HEDGE SHEARS—Fin- 
est cutlery steel, flame hardened edge blades, long bevels and 
keen edges. Top blade has sharp, hooked teeth to grip twigs 
for easy cutting. Both blades hardened, tempered, precision 
hollow ground and beautifully polished. 9 inch blades... .$3.50 
No. 1312 “TIP TOP” TREE PRUNER—A patented pruner in 
two 6 foot jointed sections which are easily and quickly as- 
sembled to make a econ 
12 foot Tree Pruner. ’ 
Tempered § steel 
blades, fittings and 
operating wire. Can 
be used in 6 ft. or 
full 12 ft. length. 
Additional extension 
sections may be 
added for even 
greater length. Two 
sections 12 ft. length. 
TiG@R i.e cicrac cities $6.00 
No. 13S—Extra Ex- 
tension 6 foot. .$1.25 
No. A1575 ‘STAND 
UP” GRASS SHEARS 
—The last word in 
a grass clipping tool. 
Cuts from a stand- 
ing position, simple 
as walking, no stoop- 
ing, bending, sore 
knees, or backaches. 
New 4 inch diameter 
wheel makes shears 
easy to position, easy 
to roll exactly where 
desired. Wheel can 
be quickly removed, 
enabling high, light 
trimming of vines 
and rock’ gardens. 
New, exclusive, 
height adjuster 
adapts Stand Up 
Grass Shears to most 
comfortable position 
for short or tall 
users. Also regu- 
lates exact trim- 
ming level ..... $3.85 
Page 61 
