UI , 
THE EVLA WeEATHER MACHINE GIVES 
YOU FASTER PRODUCTION and BETTER WREATHS 
with LESS WORK and GREATER PROFIT! 
If you have a small florist shop or if you are a wholesale florist or nurseryman, you'll appreciate 
the value of the Hillman machine. This is a machine that anyone can operate, thereby reducing 
your need of costly skilled labor. Whether you turn out a few wreaths, floral sprays, garlands 
(roping), grave blankets, etc. . . . or 10's of thousands, the Hillman machine eliminates head- 
aches and hard work . . . increases production and profits. 
Here at last is the answer to the problem of meeting heavy demands, during the Christmas 
season especially, for wreaths and other decorations . . . demands that pile up when there are 
never enough hours in your day. 
SIMPLE TO SET UP SIMPLE TO STORE AWAY 
The Hillman Wreather Machine is com- 
pletely portable. When not in use it may 
be taken down quickly and easily ... 
and may be stored or carried in_ its 
specially designed, compact carton. It is 
never in the way. 
Insert your Hillman machine into a table 
slot (photo 1)... or clamp it to the out- 
side of a bench (photo 2). Assembly of 
the machine is a simple operation by 
following instruction sheet provided with 
each machine. 
IMPROVED LINKAGE NOW NEW MODEL “B” FEATURES 
ON BOTH HILLMAN MODELS 
Strong, steel links from foot pedal to jaws on 
standard Model “A” and heavy-duty Model “B”, 
now give positive, direct-line pressure to assure 
you smooth operation and lifetime use under 
normal conditions. Steel links are adjustable to 
any standard bench height. 
IF YOU NOW OWN A HILLMAN MACHINE .. . 
you may have — free of charge — the new steel links to 
replace the original cable simply by writing for them .. . 
they’ll be sent to you prepaid. 
A MODEL “A” 
MODEL “B” A 
et 
SUPER-JAWS FOR HEAVY WORK 
A new, extra heavy duty machine, Model “B”, 
has been added to the Hillman line. Model “B” 
is identical in principal to Model “A”, but has 
been designed with larger jaws and heavier 
construction for heavy duty work and large 
volume production. 
CONVERT YOUR MODEL “A” to 
MODEL “B” at LOW COST 
If you are using standard Model ‘A’ but wish to do heavier 
work in larger volume, convert to Model “’B’ by replacing 
present jaws with new Model ’’B” jaws at low cost. 
