ELLIS QUALITY TRANSPLANTERS FOR EVERY PLANTING NEED 
TRACTOR MOUNTED SINGLE ROW TRACTOR PULL TYPE 
HORSE DRAWN TWO ROW TRACTOR PULL TYPE 
TRACTOR MOUNTED FINGER TIP MECHANICAL ?¢s1971ed for areatest speed, economy 
and efficiency in transplanting. 
THE ELLIS TRANSPLANTER mounted on the modern tractor is the perfect combination for quick and efficient transplanting of 
practically all transplantable crops. 
Mounting Brackets are available for use on 12 different make and model tractors: 
John Deere 40 Tricycle John Deere MT Farmall Cub Allis Chalmers CA 
John Deere 40 Standard Farmall Super A Case V. A. C. Ford Tractor 
John Deere M Farmall Super C Allis Chalmers B Ferguson Tractor 
The Ellis Transplanter can be mounted on tractor or taken 
off so the tractor can be used for other purposes as quickly as a 
team can be hitched to the old style horse drawn transplanter. 
Sets plants as uniformly as the best pull type transplanter. 
The Ellis Transplanter combines the uniform depth of planting 
and flexibility of the pull type transplanter with the desirable 
advantages of a mounted implement. 
The Ellis Transplanter is raised clear of the ground by the 
hydraulic lift so it is a fixed implement mounted on the tractor 
for turning, backing or transporting. 
When in operation the connection between the tractor and 
the transplanter is flexible, so the transplanter can follow the 
ground independent of the tractor. The depth of the runner 
or pressure of the covering plates is not affected by the tractor 
going over a ridge or into low ground. 
This special feature insures uniform depth of planting, also 
that the soil will be properly firmed about the stems and roots 
of each plant. 
No plants are missed with the Ellis Transplanter. 
Tractor Mounted Transplanter 
CONVENIENT TO MOUNT 
One man can mount the Ellis Transplanter. 
It is not a back-breaking job. There are no parts 
to lift. Simply wheel the transplanter into 
position and attach with a pin in the draw bar 
and one bolt in the front yoke. 
MOUNTING TRANSPLANTER 
The transplanter is attached to the tractor by 
two bolts; one bolt or pin in the draw bar and 
one bolt in the front cross yoke. 
To attach the transplanter simply wheel it 
Into position on the tractor, drop the pin in the 
hitch, attach the front yoke, place hose on the 
water valve and you are ready to plant. 
OPENERS FOR ALL SIZE 
PLANTS 
Different depth furrows openers can be 
supplied to suit the size of various plants and 
shrubs. The openers are made in depths of 4, 
5, 6, 7, 8 and 9". The 7, 8 and 9” are special 
deep openers. A special wide 6” opener is also 
available for planting bulbs and Irish potatoes. 
Single Row Tractor 
Pull Type Transplanter 
DISTANCE BETWEEN PLANTS 
The distance between plants in the row is 
regulated by the sprocket on the end of the cam 
shaft. With the sprockets furnished as regular 
equipment plants can be spaced from 11 to 77” 
apart with the transplanter using the 36” wheel 
and from 814" to 55” apart with the pull type 
transplanter using rubber tires. 
SAVE WITH TWO ROW 
The two row transplanter not only effects a 
saving at planting time, but makes it possible to 
cultivate the crop with the two row tractor 
cultivator; so the two row makes a saving in 
labor during the entire season. 
ROW ADJUSTMENT 
It is very easy to adjust the width between 
rows on the Ellis Two Row Transplanter from 37 
in. to 48 in, It is not necessary to remove any bolts 
to change the row spacing; stmply loosen six bolts 
and slide the frames to the row spacing desired. 
This change in row spacing can be made very 
Two Row Tractor Pull Type Transplanter quickly. 
eee 
56 Transplanters , PHERMEYERESEEDEG@ Or 
